How to Respond to the Bonnlo Bunk Bed CPSC Warning

On October 1, 2026, the U.S. Consumer Product Safety Commission issued Product Safety Warning 27-001 telling families to stop using Bonnlo bunk beds immediately. The slats that hold up the top bunk can fail, and when they do, the frame and top bunk can collapse onto the bed below. CPSC says that creates a risk of serious injury or death from asphyxiation and injury hazards.

The warning covers about 19,000 Bonnlo twin-over-twin metal bunk beds with a ladder, in black, gray, or white. They measure about 78 inches wide, 41.5 inches deep, and 65 inches high. They were sold online at Amazon.com, Abunda.com, eBay.com, and Walmart.com from January 2019 through September 2026 for between $140 and $170.

CPSC knows of nine reports of slat failures, including three where the top bunk collapsed onto the lower bunk. No injuries have been reported. The manufacturer, Shenzhenshi Shangyunjiajuyongpin Limited, doing business as Bonnlo, has not responded to CPSC's request to recall the beds. That means there is no refund, repair kit, or replacement program to wait for.

If your kids sleep in one of these beds, move them out of it tonight. The rest of this guide covers how to confirm what you have, where everyone sleeps in the meantime, how to get rid of the bed, and what to check before you buy the next one.

This guide is by the ParentRankings Editorial Team. Ranked by parents. For parents. We may be paid by companies we feature. This may influence rankings. If you have a younger child who needs a bed closer to the floor, our Best Toddler Beds page has the full shortlist.

What this guide covers

Our toddler beds page ranks low beds for little kids. It does not rank bunk beds. This post is the action plan for warning 27-001:

1. Stop using the Bonnlo bunk bed now, both the top and the bottom bunk.
2. Check whether your bed matches the warning.
3. Set up a safe temporary sleep spot for each child.
4. Take the bed apart and dispose of it. Do not sell, donate, or give it away.
5. Use the federal bunk bed rules to judge any replacement.
6. Report problems at SaferProducts.gov.

The five cards further down are toddler beds from our shortlist. They are there for families who realize the child on the bunk is too young for it, or who want a low bed for a younger sibling. They are not a new ranking.

Step-by-step: what to do this week

1. Stop using both bunks today

The failure CPSC describes is in the slats under the top bunk. When they give way, the child on top falls and the child below can be trapped under the collapsed frame. That is why the lower bunk is not a safe workaround. Nobody should sleep on or under the bed until it is gone.

CPSC did not limit the warning to beds that look damaged. Even if your slats look straight and solid, the instruction is to remove, replace, and dispose of the bed.

2. Match your bed to the warning

Check the bed and your order history:

• Brand: Bonnlo
• Type: Twin-over-twin bunk bed with a metal frame and a ladder
• Colors: Black, gray, or white
• Size: About 78 inches wide, 41.5 inches deep, and 65 inches high
• Sold: Amazon.com, Abunda.com, eBay.com, and Walmart.com, January 2019 through September 2026, for $140 to $170
• Warning: CPSC Product Safety Warning 27-001, October 1, 2026

Search your email and your Amazon, Walmart, or eBay order history for "Bonnlo." If you bought a metal twin-over-twin bunk bed online in that window and are not sure of the brand, compare it with the photos on the CPSC warning page before you put anyone back in it.

3. Set up a temporary sleep spot

You do not need to buy a new bed tonight. A few options that work for most families:

• Mattresses on the floor. Take both twin mattresses off the frame and put them on the floor. A floor bed removes the height and the frame entirely.
• A spare bed or a sibling sleepover. Use a guest bed or let kids double up in another room for a few nights.
• A toddler bed for a young child. If one of the kids on the bunk is a preschooler, this is a good time to move them to a low bed sized for their age.

Keep the floor area around a mattress clear of cords, heaters, and furniture that could tip.

4. Take it apart and dispose of it

Photograph the bed, any label, and your receipt first. Then take the frame apart so nobody can set it back up. Many towns accept metal bed frames at scrap metal recycling or through bulk trash pickup. Check your local rules.

Do not list it on a marketplace, leave it on the curb in one piece, or hand it down to another family. CPSC's warning says not to sell or give these beds away.

On the money side, there is no recall refund because the company has not agreed to one. You can still contact the marketplace where you bought it and ask. Results vary, so keep your photos and order number handy.

5. Report what happened

If your bed's slats bent or broke, or the top bunk sagged or fell, file a report at SaferProducts.gov. Include photos and where you bought it. Reports are how CPSC builds a case when a seller will not run a recall. If anyone was hurt, get medical care first.

What to look for in a safer bed

Whether you are buying a new bunk bed or moving a younger child to a low bed, these are the checks that matter. The bunk bed points come from the federal bunk bed standard, 16 CFR Part 1513.

• Guardrails on both sides of the top bunk: The rule requires two upper guardrails, one on each side, on any bed whose mattress foundation is more than 30 inches off the floor. The rail on the wall side must run the full length of the bed.
• Rails tall enough for your mattress: Guardrail tops must sit at least 5 inches above the mattress. Use the mattress size and maximum thickness listed in the instructions. A thicker mattress shrinks that margin.
• Small openings: Openings in the top bunk structure must be small enough to keep a child's body from slipping through, which is where entrapment injuries come from.
• A label with a real manufacturer: Compliant bunk beds carry a label naming the manufacturer or seller, the model number, and the date of manufacture, plus the warning about children under 6. A bed with no label and a seller you cannot reach is a red flag.
• Solid support under the top mattress: Look for a full set of slats or a solid platform with secure fasteners, and recheck the hardware every few months.
• Age-appropriate height: For toddlers and preschoolers, a low bed with guardrails is the safer choice.

House rules if you keep a bunk bed

The federal standard requires every bunk bed's instructions to carry these warnings:

1. Do not let children under 6 use the upper bunk.
2. Use guardrails on both sides of the upper bunk.
3. No horseplay on or under the beds.
4. Only one person on the upper bunk.
5. Use the ladder to get in and out of the upper bunk.

If the bed sits against a wall and only one rail runs the full length, that full-length rail goes on the wall side so a child cannot slip between the bed and the wall.

We do not invent experts, clinicians, or parent testimonials. Scores on the cards below come from the methodology on our toddler beds page.

Which toddler bed fits your situation

A lot of families use a bunk bed to fit two kids into one room, and sometimes the younger one ends up on a bunk before age 6. If that is your house, the warning is a good reason to move the little one to a low bed. Here is how the cards below fit different families.

You want the safest-feeling all-around pick. The DaVinci Jenny Lind Toddler Bed is about $100, GREENGUARD Gold certified, made of solid pine, and uses a standard crib mattress. Assembly takes around 30 to 45 minutes.

You need something fast and under $100. The Delta Children Taylor Toddler Bed is about $90, JPMA certified with guardrails on both sides, and goes together in under 20 minutes. The engineered wood is less sturdy than solid wood, so keep the jumping to a minimum.

You want solid wood and a fun design. The KidKraft Toddler Bed is about $150 with a wide range of themed styles. Larger models can take two adults and close to an hour to assemble.

You want one bed that grows with your child. The IKEA SUNDVIK is about $80 and extends from toddler length to a longer child length, with slats included. The extended setting needs an IKEA-size mattress.

You want a bed to keep for a second child. The Pottery Barn Kids Larkin is about $350, built from solid pine and hardwood with a GREENGUARD Gold finish. It is a lot to spend on a bed used for a few years.

Older kids who still want bunks can go back to one once you find a bed with a clear label, a reachable manufacturer, and guardrails that meet the rules above.

Before bedtime tonight

Save your photos of the bed and label, your order confirmation, the CPSC warning 27-001 page, and your SaferProducts.gov confirmation if you filed one. Tell grandparents or anyone else who bought the same bed for a second home. Then get every child onto a bed that keeps them close to the floor until a replacement is set up.

When you are ready to compare low beds for a younger child, See all 5 Best Toddler Beds ranked →.